Single Effect Evaporator Apparatus
The set-up consists of stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator. Dilute solution is feed to tubes. Steam from a steam generator is supplied to shell to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute is collected in the accumulator.
Technical Specification :-
| Material |
Stainless Steel
|
| Shell Dia |
70 mm, Length-500 mm
|
| Tube ID |
9.5 mm, OD 12.7mm
|
| Length |
500 mm
|
| Feed Circulation |
By Gravity feed
|
| Feed Tank |
Material stainless steel
|
| Capacity |
25 Ltrs.
|
| Flow Measurement |
Rotameters (One each for feed & cold water).
|
| Steam Generator |
Made of stainless steel provided with Pressure Gauge & Level Indicator, Safety valve and drain etc.
|
| Piping |
Stainless Steel and PVC, size 1/4"
|
| Condenser |
Shell & Tube type made of Stainless Steel.
|
| Bottom Product Tank |
Made of Stainless Steel, capacity 10 Ltrs.
|
| Water Supply Tank |
Made of Stainless Steel, capacity 50 Ltrs. (For condenser)
|
| Pump |
FHP capacity
|
| Heaters |
Nichrome wire heater.
|
| Control panel comprises of Digital Temp Controller |
PID Controller, 0-199.9 deg C (For Steam Generator)
|
| Digital Temp Indicator |
0-199.9 deg C, with multi-channel switch.
|
| Temp Sensors |
RTD PT-100, Standard make On/Off switch, Mains Indicator etc.
|
| Electricity Supply |
1 Phase, 220 V AC, 50 Hz, 32 amp
|
You May Also Like
